<font id="tbn79"><dl id="tbn79"></dl></font><font id="tbn79"></font>
<video id="tbn79"><output id="tbn79"></output></video><dl id="tbn79"><delect id="tbn79"></delect></dl>
<video id="tbn79"></video><dl id="tbn79"><output id="tbn79"><font id="tbn79"></font></output></dl><dl id="tbn79"></dl><dl id="tbn79"><font id="tbn79"><meter id="tbn79"></meter></font></dl>
<output id="tbn79"></output>
<dl id="tbn79"><output id="tbn79"></output></dl>
<output id="tbn79"></output>
<video id="tbn79"></video>
<dl id="tbn79"><delect id="tbn79"></delect></dl>
<dl id="tbn79"></dl>
<video id="tbn79"></video>
<video id="tbn79"><delect id="tbn79"></delect></video>
<dl id="tbn79"><output id="tbn79"><font id="tbn79"></font></output></dl><dl id="tbn79"><output id="tbn79"><font id="tbn79"></font></output></dl>
<dl id="tbn79"><output id="tbn79"></output></dl>
<dl id="tbn79"></dl>
<video id="tbn79"><output id="tbn79"><font id="tbn79"></font></output></video>
<video id="tbn79"><delect id="tbn79"><meter id="tbn79"></meter></delect></video>
<dl id="tbn79"></dl> <dl id="tbn79"></dl>
<video id="tbn79"></video>
<dl id="tbn79"></dl>
<output id="tbn79"><delect id="tbn79"><font id="tbn79"></font></delect></output>
<output id="tbn79"><delect id="tbn79"><meter id="tbn79"></meter></delect></output>
Product Center
1. Characteristics

Nolato 8700 is a conductive silicone rubber.

? A two-component thermal cure silicone filled with conductive Ag/Cu particles.

? It is used to produce integrated EMI shielding gaskets by dispensing directly on telecom and other industrial components.

? Low viscosity offers short cycle times in any dispensing machine.

? Good shielding combined with good mechanical properties.

? Operating temperatures between -55°C and +125°C.

? Good adhesion to most metal and metallised surfaces.

? Typical gasket height from 0,8 to 2,0 mm. Width to height ratio is > 1.

? Recommended compression between 10 and 50%.

2. Applications

? Nolato 8700 is particularly suitable for the traditional production of gaskets on large series of aluminium castings when there is a demand of very good shielding.

? Typical applications include EMI shielding gaskets in mobile phone base stations.

3. Processing

Nolato 8700 is a two-component compound of pasty consistency. The component A and B are delivered in 1000 ml cartridges with a shelf life of at least 4 month if stored at –18°C. The components are mixed in a ratio of 1:7,0 by weight prior to use. The mixed material is dispensed as a bead directly on the component with a standard dispensing machine. Curing is done in a hot air oven at 100°C for 30 minutes. For detailed information please refer to the

“Mixing and handling instruction”.

4.Product data

5.Mechanical properties

1 MPa = 145 psi 2 1 N/mm = 5,71 lb/in

Tested on a 0,8 mm thick gasket adhered to an aluminium substrate with a thickness of 2 mm.

6. Electrical and shielding properties

7. RoHS information

Nolato 8700 fulfils the requirements set by the EU Directive 2002/95/EC (RoHS).

8. Safety instructions

Nolato 8700 is not considered as hazardous according to EU directive 1999/45/EC and is not subject to the directive of classification, packaging and labelling of dangerous goods. A material safety data sheet can be sent on request.

9. Warranty

The data given in this product information should be taken only as a guide and not a specification. Data are based on statistical evaluation on data measured on a number of batches at Nolato.

The recommendations and data given are based on our experience to date, however, no liability can be assumed in connection with their usage and processing.






?2019 深圳市星河達科技有限公司 版權所有    粵ICP備19042287號